Mitsubishi Outlander manuals

Mitsubishi Outlander: ACD control mode

Select the control mode from the following three types to suit the driving conditions.

ACD control mode switch

READ NEXT:

 ACD control mode switch

When the ignition switch is set to the “ON” position, operate the AWC switch to change the control mode. Each time the switch is pushed, the control mode changes in the order “TARMAC” 

 ACD control mode display

Example: “TARMAC” mode is selected. The currently selected control mode is displayed on the multi-information display. In addition, when the control mode is changed, the selected mode appears

 ACD warning display

When there is a malfunction in the system, the warning display will appear on the information screen in the multi-information display. In addition, the ACD control mode display in section (A) will

SEE MORE:

 Setting the system

Follow the procedure below to set the system to the system armed mode. 1. Turn the ignition switch to the “LOCK” position. If you started the engine with the key, remove the key from the ignition switch. 2. Exit the vehicle and close all of the doors, rear hatch and bonnet. 3. Press the LOCK

 Cargo area cover

To use 1. Draw out the cover retracted by spring and insert it in the mounting grooves (A). 2. Remove the cover from the mounting grooves, and the cover will be rolled back into the retracted position. NOTE: ● Do not put luggage on the cargo area cover. To change There are 2 inst

© 2010-2025 Copyright www.mioutlander.com