Mitsubishi Outlander: Active Stability Control (ASC) OFF display screen
Mitsubishi Lancer / Mitsubishi Lancer Owner's Manual / Instruments and controls / Multi-information display / Active Stability Control (ASC) OFF display screen
This is displayed when the Active Stability Control (ASC) is turned off with the ASC OFF switch.
If there is a fault with the ASC, the ASC OFF display is shown.
Refer to ““ASC OFF” switch”.
READ NEXT:
Information screen (when the ignition switch is “ON”)
Each time you lightly press the multi-information meter switch, the display screen
switches in the following order.
1- Odometer (Type 1)/Tripmeter
2- Odometer (Type 1)/Tripmeter
3- Service re
Odometer/Tripmeter
The operation method is the same as when the ignition switch is “OFF”.
Refer to “Odometer/Tripmeter” for further details.
Service reminder
This displays the distance and number of months until the next periodic inspection.
Refer to “Service reminder”.
SEE MORE:
Sunroof*
The sunroof can only be operated with the ignition switch in the “ON” position.
To open
Press the switch (1) to open the sunroof. The sunroof stops once before the sunroof
is fully opened. Re–press the switch (1) to open completely. To stop the moving
sunroof, press the switch (2).
To
Headlamps (high/low beam, for vehicles with high intensity discharge headlamps)
Do not attempt to disassemble or repair headlamps, and do not attempt to replace
their bulbs.
Warning
► A high voltage is present in the power circuit and in the bulbs and bulb
terminals.
To avoid the risk of an electric shock, contact a MITSUBISHI MOTORS Authorized Service
Point whe
© 2010-2026 Copyright www.mioutlander.com
