Mitsubishi Outlander: Adjustable load floor
Storage space can be increased by lifting down the board.
Caution
► The exhaust pipe remains hot for a while after stopping the engine, so be
sure not to touch it.
► Do not stand behind the exhaust pipe when loading and unloading luggage. The heat
from the exhaust could cause burns.
► Be careful not to catch your hands or fingers when handling the board.
Note
► Make sure there are no objects above or below the board before handling it.
If the board is lowered with something on it, the item could be damaged.
► When loading the heavy luggage, etc. lower and use the board. The board could
be deformed.
1. Raise the rear part of the board.
2. Pull the board forward until the front part is lowered.
3. Push the board in all the way with the front part lowered, and lower the board.
4. Make sure the board is set firmly in place.
5. Follow this procedure in reverse to return the board to its original position.
READ NEXT:
Assist grip
These grips are to support the body by hand while seated in the vehicle.
Caution
► Do not use the assist grips when getting into or out of the vehicle.
The assist grips could detach and ca
Coat hook
There is a coat hook on the rear seat assist grip of the driver’s side.
Warning
► Do not put a hanger or any heavy or pointed object on the coat hook. If
the curtain airbag was activate
SEE MORE:
Running-in recommendations
During the running-in period for the first 1,000 km (600 miles), it is advisable
to drive your new vehicle using the following precautions as a guideline to aid
long life as well as future economy and performance.
● Do not race the engine at high speeds.
● Avoid rapid starting, a
Hazard warning flasher switch
Use the hazard warning flasher switch when the vehicle has to be parked on the
road for any emergency.
The hazard warning flashers can always be operated, regardless of the position
of the ignition switch.
Push the switch to turn on the hazard warning flashers, all turn signal lamps
flash
