Mitsubishi Outlander: For pleasant driving
Mitsubishi Lancer / Mitsubishi Lancer Owner's Manual / For pleasant driving
- Ventilators
- Heater
- Manual air conditioning
- Automatic air conditioning
- Important operation tips for the air conditioning
- Air purifier
- LW/MW/FM digital tuning radio with CD player
- LW/MW/FM digital tuning radio with CD changer
- To play tracks from USB device
- To play tracks from a Bluetooth® device (vehicles with Bluetooth® 2.0 interface)
- To use the external audio input function
- Steering wheel audio remote control switches
- Error codes
- Error codes (iPod)
- Error codes (USB memory device)
- Handling of compact discs
- Antenna
- Digital clock
- Link System
- Bluetooth® 2.0 interface
- USB input terminal
- Sun visors
- Ashtray
- Cigarette lighter
- Accessory socket
- Interior lamps
- Storage spaces
- Cup holder
- Bottle holder
- Rear shelf panel
- Adjustable load floor
- Assist grip
- Coat hook
READ NEXT:
Ventilators
1- Centre ventilators
2- Side ventilators
Note
► Do not place beverages on top of the instrument panel. If they splash into
the air conditioning ventilators, they could damage the system
Air flow and direction adjustments
Centre ventilators
Move the knob (A) to make adjustments.
To close the ventilator, move the knob (A) to the inside as far as possible.
1- Close
2- Open
Side ventilators
Move the knob (A) to ma
Changing the mode selection
To change the position and amount of air flowing from the ventilators, turn the
mode selection dial.
(Refer to “Mode selection dial”.) These symbols are used in the
next several illustrations
SEE MORE:
Operating hints
(1) Do not let the clutch slip (vehicles with a manual transmission only) and
do not increase the engine speed more than necessary when starting. (2) Be sure
that the driving speed does not exceed the 100 km/h for trailer operation. It is
also recommended that you obey the local regulations
To turn from “ACC” to “LOCK”
1. [Vehicles equipped with M/T]
Push the emergency key in at the “ACC” position and keep it depressed until it is
turned to the “LOCK” position, and remove it.
[Vehicles equipped with CVT or Twin Clutch SST]
First, set the selector lever (CVT) or the gearshift lever (Twin Clutch SST) to
© 2010-2025 Copyright www.mioutlander.com
