Mitsubishi Outlander: Error codes (USB memory device)
Mitsubishi Lancer / Mitsubishi Lancer Owner's Manual / For pleasant driving / Error codes (USB memory device)
Vehicles with Link System
If an error code (1) appears in the display, take action in accordance with the table below.
READ NEXT:
Handling of compact discs
► Use only the type of compact discs that have the mark shown in the illustration
below.
(Playback of CD-R or CD-RW discs may cause problems.)
► The use of special shaped, damaged co
Antenna
To remove
Turn the pole (A) anticlockwise.
To install
Screw the pole (A) clockwise into the base (B) until it is securely retained.
Note
► Be sure to remove the roof antenna in the follo
Digital clock
Automatic mode and manual mode are available for digital clock adjustment.
Select the automatic mode or the manual mode by performing the following operations:
1. Press the PWR switch (A) to turn
SEE MORE:
If the lamp illuminates while driving
(1) Since there will always be a possibility of the vehicle becoming unstable
when brakes are applied rapidly, ensure that brakes are applied gently and that
high– speed driving is not attempted; furthermore, bring the vehicle to halt in
a safe location. Restart the engine and check to see w
Starting
Tips for starting
► Do not operate the starter motor continuously longer than 10 seconds; doing
so could run down the battery. If the engine does not start, turn the ignition switch
back to “LOCK”, wait a few seconds, and then try again.
Trying repeatedly with the starter motor still
© 2010-2025 Copyright www.mioutlander.com
