Mitsubishi Outlander: Automatic air conditioning
Mitsubishi Lancer / Mitsubishi Lancer Owner's Manual / For pleasant driving / Automatic air conditioning
The air conditioning can only be used while the engine is running.
READ NEXT:
Control panel
A- Temperature control dial
B- Air selection switch
C- Blower speed selection dial
D- Air conditioning switch
E- Mode selection dial
F- Rear window demister switch
Note
► There is an i
Operating the system in automatic mode
In normal conditions, use the system in the AUTO mode and follow these procedures:
1. Set the blower speed selection dial to the “AUTO” position.
2. Set the temperature control dial to the de
Operating the system in manual air mode
Blower speed and ventilator mode may be controlled manually by setting the blower
speed selection dial and the mode selection dial to the desired positions.
To return to automatic operation, set th
SEE MORE:
Heated seats*
The heated seats can be operated with the ignition switch in the “ON” position.
A– For driver’s switch B– For passenger’s switch
1- Heater high (for quick heating) 2- Heater off 3- Heater low (to keep the
seat warm)
The indication lamp (C) will illuminate while the heater is on.
Cigarette lighter
The cigarette lighter can be used while the ignition switch or the operation
mode is in ON or ACC.
1- Push all the way in.
The cigarette lighter will automatically return to its original position with
a “click” when ready. Pull it out for use.
After use, insert the cigarette lighter to
© 2010-2025 Copyright www.mioutlander.com
