Mitsubishi Outlander: Operating the system in automatic mode
In normal conditions, use the system in the AUTO mode and follow these procedures:
1. Set the blower speed selection dial to the “AUTO” position.
2. Set the temperature control dial to the desired temperature.
3. Set the mode selection dial to the “AUTO” position.
The outlet position (except 
), recirculation/outside
air select and blower speed, and ON/OFF of air conditioning will be controlled automatically.
To stop the system, turn the blower speed selection dial to the “OFF” position.
Caution
► When using the air conditioning, the idling speed may slightly increase as the air conditioning compressor is switched on/off automatically. While the vehicle equipped with CVT or Twin Clutch SST is stationary, fully depress the brake pedal to prevent the vehicle from creeping.
Note
► While the engine coolant temperature is low, the temperature of the air from
the heater will be cool/cold until the engine warms up, even if you have selected
warm air with the dial. To prevent the windscreen and windows from fogging up, the
ventilator mode will be changed to and
the blower speed will be reduced.
► If the blower speed selection dial, air conditioning switch, mode selection dial,
or air selection switch is operated while the system is operating in the AUTO mode,
the activated function overrides the corresponding function of automatic control.
All other functions remain under automatic control.
READ NEXT:
Operating the system in manual air mode
Blower speed and ventilator mode may be controlled manually by setting the blower
speed selection dial and the mode selection dial to the desired positions.
To return to automatic operation, set th
Important operation tips for the air conditioning
► Park the vehicle in the shade.
Parking in the hot sun will make the vehicle inside extremely hot, and it will
require more time to cool the interior.
If it is necessary to park in the sun,
Air purifier
An air filter has been incorporated into this air conditioning so that dirt and
dust are cleaned from the air.
Replace the air filter periodically as its ability to clean the air will be reduced
SEE MORE:
Trailer towing
In order to tow a trailer with your vehicle, when having a trailer towing device
mounted that meets all relevant regulations in your area, consult a MITSUBISHI MOTORS
Authorized Service Point.
The regulations concerning the towing of a trailer may differ from country to
country. You are advis
Cleaning plastic parts
Use a sponge or chamois leather.
If a car wax adheres on a grey or black rough surface of the bumper, moulding
or lamps, the surface becomes white. In such a case, wipe it off using lukewarm
water and soft cloth or chamois leather.
Caution
► Do not use a scrubbing brush or other hard t
