Mitsubishi Outlander manuals

Mitsubishi Outlander: Changing the mode selection

To change the position and amount of air flowing from the ventilators, turn the mode selection dial.

(Refer to “Mode selection dial”.) These symbols are used in the next several illustrations to demonstrate the quantity of air coming from the ventilators.

: Medium amount of air from the ventilators: Small amount of air from the ventilators
: Large amount of air from the ventilators: Medium amount of air from the ventilators
Face position: Large amount of air from the ventilators

Face position

Air flows only to the upper part of the passenger compartment.

Foot/Face position

Foot/Face position

Air flows to the upper part of the passenger compartment, and flows to the leg area.

Note

► With the mode selection dial between the Note

► With the mode selection dial between the positions, the air flows mainly toand the upper part of the passenger compartment. positions, the air flows mainly to the upper part of the passenger compartment.

With the mode selection dial between the positions, the air flows mainly to and the leg area. positions, the air flows mainly to the leg area.

Foot position

Air flows mainly to the leg area.

Foot/Demister position

Foot/Demister position

Air flows to the leg area, the windscreen and the door windows.

Note

► With the mode selection dial between the Note

► With the mode selection dial between the positions, the air flows mainly to and the leg area. With the mode selection dial between the positions, the air flows mainly to the leg area. With the mode selection dial between the positions, the air flows mainly toand the windscreen and door windows. positions, the air flows mainly to the windscreen and door windows.

Demister position

Air flows mainly to the windscreen and the door windows.

Heater

READ NEXT:

 Heater

The heater can only be used while the engine is running.

 Control panel

A- Temperature control dial B- Air selection switch C- Blower speed selection dial D- Mode selection dial E- Rear window demister switch Note ► Button (F) is not available for use. The

 Blower speed selection dial

Select the blower speed by turning the blower speed selection dial clockwise or anticlockwise. The blower speed will gradually increase as the dial is turned to the right.

SEE MORE:

 Upholstery

1. To maintain the value of your new vehicle, handle the upholstery carefully and keep the interior clean. Use a vacuum cleaner and brush to clean the seats. If stained, vinyl and synthetic leather should be cleaned with an appropriate cleaner, and cloth fabrics can be cleaned with either upho

 Adjustable load floor

Storage space can be increased by lifting down the board. Caution ► The exhaust pipe remains hot for a while after stopping the engine, so be sure not to touch it. ► Do not stand behind the exhaust pipe when loading and unloading luggage. The heat from the exhaust could cause bur

© 2010-2025 Copyright www.mioutlander.com