Mitsubishi Outlander: Blower speed selection dial
Mitsubishi Lancer / Mitsubishi Lancer Owner's Manual / For pleasant driving / Heater / Control panel / Blower speed selection dial
Select the blower speed by turning the blower speed selection dial clockwise or anticlockwise.
The blower speed will gradually increase as the dial is turned to the right.
READ NEXT:
Temperature control dial
Turn the temperature control dial clockwise or anticlockwise.
Note
► While the engine coolant temperature is low, the temperature of the air from
the heater will be cool/cold until the engi
Air selection switch
To change the air selection, simply press the air selection switch.
A sound will be made every time you push the switch.
► Outside air: Indication lamp (A) is OFF Outside air is introduced int
Customizing the air selection (Changing function settings)
Functions can be changed as desired, as stated below.
► Enable automatic air control:
When the heater operates, the air selection switch will be automatically controlled.
► Disable auto
SEE MORE:
Lamps (room lamps, etc.) auto-cutout function (Vehicles with keyless entry system
or keyless operation system)
If any of the interior lamps are left switched on with the ignition switch in
any position other than “ON” or “ACC”, it goes off automatically after approximately
30 minutes.
The lamp goes on again if the ignition switch is turned to the “ON” or “ACC”
position, any door or the
Side turn-signal lamps
Insert a straight blade (or minus) screwdriver at the edge of the lens, remove
the socket assembly and bulb together by turning it anticlockwise, and then remove
the bulb by pulling out.
NOTE
Wrap a piece of cloth around the straight blade (or mines) screwdriver in
order to avoid scratchin
© 2010-2025 Copyright www.mioutlander.com
