Mitsubishi Outlander: Temperature control dial
Mitsubishi Lancer / Mitsubishi Lancer Owner's Manual / For pleasant driving / Heater / Control panel / Temperature control dial
Turn the temperature control dial clockwise or anticlockwise.
Note
► While the engine coolant temperature is low, the temperature of the air from the heater will be cool/cold until the engine warms up, even if you have selected warm air with the dial.
READ NEXT:
Air selection switch
To change the air selection, simply press the air selection switch.
A sound will be made every time you push the switch.
► Outside air: Indication lamp (A) is OFF Outside air is introduced int
Customizing the air selection (Changing function settings)
Functions can be changed as desired, as stated below.
► Enable automatic air control:
When the heater operates, the air selection switch will be automatically controlled.
► Disable auto
Operating the heater system
Heating
Set the mode selection dial to the
position and set the air selection
switch (A) to the outside position.
Turn the temperature control dial clockwise or anticlockwise to the desired temp
SEE MORE:
Engine coolant
To check the coolant level
A transparent coolant reserve tank (A) is located in the engine compartment.
The coolant level in this tank should be kept between the “LOW” and “FULL” marks
when measured while the engine is cold.
To add coolant
The cooling system is a closed system and no
Cruise control
Cruise control is an automatic speed control system that keeps a set speed. It
can be activated at about 40 km/h (25 mph) or more.
CAUTION
• When you do not wish to drive at a set speed, turn off the cruise control
for safety.
• Do not use cruise control when driving conditions will not
© 2010-2026 Copyright www.mioutlander.com
