Mitsubishi Outlander: Control panel
Mitsubishi Lancer / Mitsubishi Lancer Owner's Manual / For pleasant driving / Heater / Control panel
A- Temperature control dial
B- Air selection switch
C- Blower speed selection dial
D- Mode selection dial
E- Rear window demister switch
Note
► Button (F) is not available for use. The indicator below the button doesn’t come on even if it is pushed.
- Blower speed selection dial
- Temperature control dial
- Air selection switch
- Customizing the air selection (Changing function settings)
READ NEXT:
Blower speed selection dial
Select the blower speed by turning the blower speed selection dial clockwise
or anticlockwise.
The blower speed will gradually increase as the dial is turned to the right.
Temperature control dial
Turn the temperature control dial clockwise or anticlockwise.
Note
► While the engine coolant temperature is low, the temperature of the air from
the heater will be cool/cold until the engi
Air selection switch
To change the air selection, simply press the air selection switch.
A sound will be made every time you push the switch.
► Outside air: Indication lamp (A) is OFF Outside air is introduced int
SEE MORE:
Turn-signal lever
1- Turn-signals
When making a normal turn, use position (1). The lever will return automatically
when cornering is completed.
2- Lane-change signals
When moving the lever to (2) slightly to change a lane, the turn-signal lamps
and indication lamp in the instrument cluster will only flash wh
For cold and snowy weather
Ventilation slots
The ventilation slots in front of the windscreen should be kept clear of leaves
or brushed clear after heavy snowfall, so that the operation of the heating and
ventilation systems will not be impaired.
Weatherstripping
To prevent freezing of the weatherstripping on the doors
© 2010-2025 Copyright www.mioutlander.com
