Mitsubishi Outlander: Alarm activation
Mitsubishi ASX / Mitsubishi ASX Owner's Manual / Locking and unlocking / Security alarm system / Alarm activation
When the system is in the system armed mode, the alarm will be activated as follows if the vehicle is unlocked or if any of the doors, tailgate or bonnet is opened using a method other than the keyless entry system or the keyless operation function.
1. The alarm will be activated for approximately 30 seconds. The turn-signal lamps will blink, and the siren will sound intermittently.
2. The alarm will resume if unlawful actions are taken again, even if the alarm has stopped.
NOTE
• During an alarm operation, the alarm is displayed on the information screen in the multiinformation display.
Type 1
Type 2
READ NEXT:
Cancelling the alarm
It is possible to halt the activation of an alarm using the following methods:
• Pressing the LOCK or UNLOCK switch on the remote control switch.
(After pressing the LOCK switch, the vehicle will
Electric window control
The electric windows can only be operated with the ignition switch in the “ON”
position or the operation mode in ON.
WARNING
• Before operating the electric window control, make sure that n
Sunshade
WARNING
• Never leave a child (or other person who might not be capable of safe operation
of the sunshade switch) in the vehicle alone.
• Before operating the sunshade, make sure that nothing
SEE MORE:
To lock without using the key
Set the inside lock knob (1) to the locked position, and close the door (2).
Note
► The driver’s door cannot be locked using the inside lock knob while the driver’s
door is opened.
Keyless operation key take-out monitoring system
Type 1
Type 2
When the vehicle is parked with the ignition switch in any position other than
“LOCK” (PUSH OFF), if you close the door after opening any of the doors and taking
the keyless operation key out of the vehicle, a warning displays and the buzzer
sounds 4 times.
Note
`
© 2010-2025 Copyright www.mioutlander.com
