Mitsubishi Outlander: Alarm activation
Mitsubishi Lancer / Mitsubishi Lancer Owner's Manual / Locking and unlocking / Security alarm system / Alarm activation
When the system is in the system armed mode, the alarm will be activated as follows if the vehicle is unlocked or if any of the doors, rear hatch or bonnet is opened using a method other than the keyless entry system or the keyless operation function.
1. The alarm will be activated for approximately 30 seconds. The turn-signal lamps will blink, and the siren will sound intermittently.
2. The alarm will resume if unlawful actions are taken again, even if the alarm has stopped.
Note
► During an alarm operation, the alarm is displayed on the information screen in the multiinformation display.
READ NEXT:
Cancelling the alarm
It is possible to halt the activation of an alarm using the following methods:
► Pressing the LOCK or UNLOCK switch on the remote control switch.
(After pressing the LOCK switch, the vehicle
Electric window control
The electric windows can only be operated with the ignition switch in the “ON”
position.
Electric window control switch
Each door window opens or closes while the corresponding switch is operated.
1- Driver’s door window
2- Front passenger’s door window
3- Rear left door window
4- Rear right door window
5- L
SEE MORE:
USB control panel and display
1- AM/FM button
2- CD (Mode change) button
3- PWR (On-Off) button
4- DISP (Title display) button
5- PAGE (Title scroll) button
6- RPT (Repeat) button
7- RDM (Random) button
8- (Fast-reverse) button
9- (Fast-forward) button
10- U (USB) indicator
11- FOLDER indicator
Power steering system
When the engine is stopped, the power steering system will not function and it
will require greater manual effort to operate the steering wheel. Keep this in mind
in particular when towing the vehicle. Never turn off the engine while driving.
Periodically check the power steering fluid level.
© 2010-2025 Copyright www.mioutlander.com
