Mitsubishi Outlander manuals

Mitsubishi Outlander: Aluminium wheels

Mitsubishi Lancer / Mitsubishi Lancer Owner's Manual / Vehicle care / Cleaning the exterior of your vehicle / Aluminium wheels

1. Remove dirt using a sponge while sprinkling water on the wheel.

2. Use neutral detergent on any dirt that cannot be removed easily with water.

Rinse off the neutral detergent after washing the wheel.

3. Dry the wheel thoroughly using a chamois leather or a soft cloth.

► Do not use a brush or other hard implement on the wheels. Caution

► Do not use a brush or other hard implement on the wheels.
Doing so could scratch the wheels.
► Do not use any cleaner that contains an abrasive substance or is acidic or alkaline.
Doing so could cause the coating on the wheels to peel or become discoloured or stained.
► Do not directly apply hot water using a steam cleaner or by any other means.
► Contact with seawater and road deicer can cause corrosion. Rinse off such substances as soon as possible.

READ NEXT:

 Window glass

The window glass can normally be cleaned using only a sponge and water. Glass cleaner can be used to remove oil, grease, dead insects, etc. After washing the glass, wipe dry with a clean, dry, soft

 Wiper blades

Use a soft cloth and glass cleaner to remove grease, dead insects, etc., from the wiper blades. Replace the wiper blades when they no longer wipe properly.

 Cleaning the sunroof

Clean the inside of the sunroof with a soft cloth. Hard deposits should be wiped away with a cloth dipped in warm, neutral detergent solution. Wipe away the solution with a sponge dipped in fresh w

SEE MORE:

 ACD warning display

When there is a malfunction in the system, the warning display will appear on the information screen in the multi-information display. In addition, the ACD control mode display in section (A) will go out at the same time. Caution ► The system may be malfunctioning. Park your vehicle

 Cigarette lighter

The cigarette lighter can be used while the ignition switch is in the “ON” or “ACC” position. 1- Push all the way in. The cigarette lighter will automatically return to its original position with a “click” when ready. Pull it out for use. After use, insert the cigarette lighter

© 2010-2026 Copyright www.mioutlander.com