Mitsubishi Outlander manuals

Mitsubishi Outlander: Anti-theft lock

The anti-theft lock is located on the top of the rear seatback. The cylinder

The anti-theft lock is located on the top of the rear seatback. The cylinder is operated with the master key (A).

When the lock is in the “LOCK” position, the seatback cannot be folded down by using the seatback release button.

This feature is useful to help prevent theft when the vehicle is parked in an exposed area, because the “trunk through” feature does not then apply.

The seatback can be folded down when the lock is turned to the “FREE” position.

1- Lock
2- Free

At other times, leave the lock at the “FREE” position.

READ NEXT:

 Head restraints

WARNING (1) The head restraints can only protect you if they are correctly adjusted. (2) A cushion or similar device should not be placed on the seatback as it may increase the distance between y

 Height adjustment

Adjust the head restraint height so that the centre of the restraint is as close as possible to eye level to reduce the chances of injury in the event of collision. Any person too tall for the r

 Adjusting head restraint forward or backward (Front seat only)

Tilt the head restraint forward to adjust it forward. To adjust it backward, tilt the head restraint backward.

SEE MORE:

 Warning display

If an abnormal condition occurs in the system, the following display/indicator will turn on. - ASC indicator Warning display Caution ► If the warning is displayed, the hill start assist will not operate. Start off carefully. ► Park your vehicle in a safe place and stop the en

 Removal of head restraints

To remove the head restraints, lift the head restraint with the height adjusting knob (A) pushed in. To install the head restraints, first confirm that they are facing in the correct direction, and then insert them into the seatback while pressing the height adjusting knobs (A) in the direc

© 2010-2025 Copyright www.mioutlander.com