Mitsubishi Outlander: Rear seat
Folding the seatback forward
The right and left seatbacks can be folded forward separately.
Push the seatback forward
Push the seatback until it clicks and check if the seatback is locked.
NOTE
The passenger and luggage compartments can be joined by folding the rear seatback forward. This is useful for carrying long objects. (Sedan only)
READ NEXT:
Folding the seat (Hatchback)
1. Remove the rear shelf panel and rear head restraints. Refer to the description
of “Rear shelf panel” on page NO TAG and “Head restraints” on page 3–7.
2. Pull the band (between the
Anti-theft lock
The anti-theft lock is located on the top of the rear seatback. The cylinder
is operated with the master key (A).
When the lock is in the “LOCK” position, the seatback cannot be folded down b
Head restraints
WARNING
(1) The head restraints can only protect you if they are correctly adjusted.
(2) A cushion or similar device should not be placed on the seatback as it may increase
the distance between y
SEE MORE:
Economical driving
For economical driving, there are some technical requirements that have to be
met. The prerequisite for low fuel consumption is a properly adjusted engine. In
order to achieve longer life of the vehicle and the most economical operation, we
recommend you to have the vehicle checked at regular
When turning from “ACC” to “LOCK”
[Vehicles equipped with M/T] Put the gearshift lever into the “N” (Neutral) position,
and slowly turn the ignition switch to the “LOCK” position while pressing it.
[Vehicles equipped with CVT or Twin Clutch SST] First, set the selector lever
(CVT) or the gearshift lever (Twin Clutch SST
© 2010-2025 Copyright www.mioutlander.com
