Mitsubishi Outlander manuals

Mitsubishi Outlander: Warning activation

In order to prevent vehicle theft or the accidental operation of the keyless operation system, the buzzer and the display on the information screen in the multi- information display are used to alert the driver.

If a warning is activated, always check the vehicle and the keyless operation key. The warning is also displayed if there is a fault in the keyless operation system.

If any of the following warnings are activated, please contact a MITSUBISHI MOTORS Authorized Service Point.

In the following cases, a warning is activated, but it can be cancelled if the

In the following cases, a warning is activated, but it can be cancelled if the correct actions are followed.

► The ID codes for the keyless operation key and vehicle do not match.

► Even though you press the driver’s or front passenger’s door lock/unlock switch,

► Even though you press the driver’s or front passenger’s door lock/unlock switch, or the rear hatch LOCK switch, the doors and rear hatch are not locked.

Keyless operation key take-out monitoring system

READ NEXT:

 Keyless operation key take-out monitoring system

Type 1 Type 2 When the vehicle is parked with the ignition switch in any position other than “LOCK” (PUSH OFF), if you close the door after opening any of the doors and taking the keyles

 Key lock-in prevention system

When the ignition switch is in the “LOCK” (PUSH OFF) position, if you close all the doors and the rear hatch with the keyless operation key left in the vehicle and you try to lock the doors

 Door ajar prevention system

When the ignition switch is in the “LOCK” (PUSH OFF) position, if you try to lock the doors and rear hatch by pressing the driver’s or front passenger’s door lock/unlock switch, or the r

SEE MORE:

 To change the indication on the screen of the inside rear-view mirror

It is possible to turn off the screen of the inside rearview mirror and change the language of the warning messages on the screen. To temporarily set the non- display mode If you press the switch (1) while the image appears on the display, it goes off temporarily. To return to display mode,

 System armed mode

(The buzzer stops and the security indicator continues to blink with indicator’s reduced lit-up duration time.) Once the system preparation mode has ended, the system armed mode starts. If an unlawful opening of any of the doors, rear hatch or bonnet is detected during the system armed mode

© 2010-2025 Copyright www.mioutlander.com