Mitsubishi Outlander manuals

Mitsubishi Outlander: To adjust forward or backward

Lift the seat adjusting lever and adjust the seat forward or backward to the

Lift the seat adjusting lever and adjust the seat forward or backward to the desired position. After adjustment, release the adjusting lever to lock the seat in position.

WARNING

To ensure the seat is locked securely, attempt to move the seat forward or backward without using the lever.

READ NEXT:

 To recline the seatback

Adjust the seatback angle by turning the dial. 1- To move to forward direction 2- To recline rearward WARNING To minimize the risk of personal injury in the event of a collision or sudden braki

 To adjust seat cushion height (driver’s side only)

Seat cushion height can be adjusted. To alter the height of the front of seat cushion 1- Raise 2- Lower To alter the height of the rear of seat cushion 3- Raise 4- Lower

 Lumbar support adjustment (driver’s side only)

A lumbar support adjustment is located in the seatback of the driver’s seat. the support has a two position adjustment. 1- Strong 2- Weak

SEE MORE:

 Room lamps

Insert a straight blade (or minus) screwdriver into the notch of the lamp assembly and pry gently to remove the lens. Remove the lamp bulb from the lamp holder. NOTE Wrap a piece of cloth around the straight blade (or minus) screwdriver in order to avoid scratching the lens.

 To remove the key

For vehicles equipped with a M/T, when removing the key, push the key in at the “ACC” position and keep it depressed until it is turned to the “LOCK” position, and remove it. For vehicles with CVT or Twin Clutch SST, when removing the key, first set the selector lever (CVT) or gears

© 2010-2025 Copyright www.mioutlander.com