Mitsubishi Outlander: Seat adjustment
Adjust the driver’s seat so that you are comfortable and that you can reach the pedals, steering wheel, switches etc. while retaining a clear field of vision.
WARNING
(1) If required, always adjust the seating before the vehicle is in motion.
After adjustments are made, ensure the seating is locked in position by attempting
to move the seat and seatback forward and rearward without using the adjusting mechanism.
(2) It is extremely dangerous to ride in the luggage area (inside or outside) of
a vehicle. Also, the luggage area and rear seats should never be used as a play
area by children. In a collision, people or children riding unrestrained in these
areas are more likely to be seriously injured or killed. Do not allow people or
children to ride in any area of your vehicle that is not equipped with seats and
seat belts, and make sure that everyone travelling in your vehicle is in a seat
and wearing a seat belt, or in the case of a child is strapped in a child restraint.
In the interest of their safety, children should not be allowed to adjust the seats.
(3) To minimize the risk of personal injury in the event of a collision or sudden
braking, the seatbacks should always be in the almost upright position while the
vehicle is in motion. The protection provided by the seat belts may be reduced significantly
when the seatback is reclined. There is greater risk that the passenger will slide
under the seat belt, resulting in serious injury, when the seatback is reclined.
CAUTION
(1) Make sure that the seat is adjusted by an adult.
If it is adjusted
by a child, an unexpected accident might occur.
(2) Do not place a cushion or
the like between your back and the seatback while driving. The effectiveness of
the head restraints will be reduced in the event of an accident.
(3) When sliding
or reclining the seat rearward, pay careful attention to the rear seat passengers.
- To adjust forward or backward
- To recline the seatback
- To adjust seat cushion height (driver’s side only)
- Lumbar support adjustment (driver’s side only)
READ NEXT:
To adjust forward or backward
Lift the seat adjusting lever and adjust the seat forward or backward to the
desired position. After adjustment, release the adjusting lever to lock the seat
in position.
WARNING
To ensure the
To recline the seatback
Adjust the seatback angle by turning the dial.
1- To move to forward direction 2- To recline rearward
WARNING
To minimize the risk of personal injury in the event of a collision or
sudden braki
To adjust seat cushion height (driver’s side only)
Seat cushion height can be adjusted.
To alter the height of the front of seat cushion
1- Raise 2- Lower
To alter the height of the rear of seat cushion
3- Raise 4- Lower
SEE MORE:
Using the MIVEC engine
The MIVEC engine automatically controls valve timing in accordance with driving
conditions for maximum engine performance.
Note
► To protect the engine, the high-speed mode may not be selected while the engine
coolant temperature is low.
11. Remove the keyless operation key from the em
Aluminium wheels
A protective coating is provided over the aluminium type wheels.
Clean aluminium wheels with a cleaner designed for use on aluminium and apply
an appropriate protection agent.
NOTE
(1) When cleaning aluminium type wheels, do not use abrasive cleaners. Wheels
exposed to sea water or road chemi
