Mitsubishi Outlander: To adjust seat cushion height (driver’s side only)

Seat cushion height can be adjusted.
To alter the height of the front of seat cushion
1- Raise
2- Lower

To alter the height of the rear of seat cushion
3- Raise
4- Lower
READ NEXT:
A lumbar support adjustment is located in the seatback of the driver’s seat.
the support has a two position adjustment.
1- Strong 2- Weak
Folding the seatback forward
The right and left seatbacks can be folded forward separately.
Push the seatback forward
Push the seatback until it clicks and check if the seatback is locked.
NOTE
1. Remove the rear shelf panel and rear head restraints. Refer to the description
of “Rear shelf panel” on page NO TAG and “Head restraints” on page 3–7.
2. Pull the band (between the
SEE MORE:
1. Fasten the seat belt.
2. Make sure the parking brake is applied.
3. Depress and hold the brake pedal.
4. Fully depress the clutch pedal.
Note
► On vehicles with the Auto Stop & Go (AS&G) system, the starter will not operate
unless the clutch pedal is fully depressed (Clutch
Selecting manual shifting
While the vehicle is stopped or being driven, move the gearshift lever from the
“D” (DRIVE) position in the main shift gate towards the driver’s seat to select
manual shifting.
Shifting up and shifting down
Each time the gearshift lever is pulled rearward, th
© 2010-2025 Copyright www.mioutlander.com
