Mitsubishi Outlander: Automatic headlamp levelling (vehicles with discharge headlamps)
This mechanism automatically adjusts the direction of the headlamps (beam position)
depending on changes in the condition of the vehicle, such as the number of occupants
or luggage weight. When the headlamps are illuminated with the ignition switch or
the operation mode in ON, the beam position of the headlamps is automatically adjusted
when the vehicle is stopped.
Headlamp automatic levelling system warning display

If there is a fault in the automatic headlamp levelling system, the warning display
is displayed on the information screen in the multi-information display.
CAUTION
• If a warning is displayed, the system may be malfunctioning, so we recommend
you to have your vehicle inspected.
READ NEXT:
1- Turn-signals
When making a normal turn, use position (1). The lever will return automatically
when cornering is completed.
2- Lane-change signals
When moving the lever to (2) slightly to cha
Use the hazard warning flasher switch when the vehicle has to be parked on the
road for any emergency.
The hazard warning flashers can always be operated, regardless of the ignition
switch positi
SEE MORE:
Open the washer fluid reservoir cap and check the level of washer fluid with
the dipstick.
If the level is low, replenish the container with washer fluid.
NOTE:
● The washer fluid container serves the windscreen, rear window and headlamps.
During cold weather
To ensure proper operatio
[For vehicles equipped with keyless operation system]
For information on operations for vehicles equipped with the
keyless operation system, refer to “Keyless operation system: Engine switch”.
[Except for vehicles equipped with keyless operation system]
LOCK
The engine is stopped and the
© 2010-2026 Copyright www.mioutlander.com
