Mitsubishi Outlander: Headlamp levelling
- Headlamp levelling switch (except for vehicles with discharge headlamps)
- Automatic headlamp levelling (vehicles with discharge headlamps)
READ NEXT:
Headlamp levelling switch (except for vehicles with discharge headlamps)
The angle of the headlamp beam varies depending on the load carried by the vehicle.
The headlamp levelling switch can be used to adjust the headlamp illumination
distance (when the lower beam is il
Automatic headlamp levelling (vehicles with discharge headlamps)
This mechanism automatically adjusts the direction of the headlamps (beam position)
depending on changes in the condition of the vehicle, such as the number of occupants
or luggage weight. When th
Turn-signal lever
1- Turn-signals
When making a normal turn, use position (1). The lever will return automatically
when cornering is completed.
2- Lane-change signals
When moving the lever to (2) slightly to cha
SEE MORE:
Rear window demister switch
The rear window demister switch can be operated when the engine is running.
Push the switch to turn on the rear window demister.
It will be turned off automatically in about 20 minutes. To turn off the demister
within about 20 minutes, push the switch again.
The indication lamp (A) will illumin
To check the fluid level
The fluid level must be between the “MAX” and “MIN” marks on the reservoir.
The fluid level is monitored by a float. When the brake fluid level falls below
the “MIN” mark, the brake fluid warning lamp lights up.
The fluid level falls slightly with wear of the brake pads, but this d
© 2010-2025 Copyright www.mioutlander.com
