Mitsubishi Outlander: Cargo room lamp
Mitsubishi Lancer / Mitsubishi Lancer Owner's Manual / Maintenance / Replacement of lamp bulbs / Cargo room lamp
When replacing the bulb, put the cargo room lamp switch into the “OFF” position.
1. Insert a straight blade (or minus) screwdriver with a cloth over its tip into the notch of the lamp assembly and pry gently to remove the lens.
2. Remove the bulb by pulling it out.
3. To install the bulb, perform the removal steps in reverse.
READ NEXT:
Vehicle identification number
The vehicle identification number is stamped as shown in the illustration.
SEE MORE:
Emergency starting
If the engine cannot be started because the battery is weak or dead, the battery
from another vehicle can be used with jumper cables to start the engine.
WARNING
• To start the engine using jumper cables connected to another vehicle, perform
the correct procedures according to the instructi
Petrol-powered vehicles
1600 models
AS&G: Auto Stop & Go (AS&G) system
Note
► The values shown above apply to a vehicle on which optional equipment has not
been fitted.
► The results given do not express or imply any guarantee of the fuel consumption
of the particular vehicle.
The vehicl
© 2010-2025 Copyright www.mioutlander.com
