Mitsubishi Outlander: Display unit selection
Originally, km/h and L/100 km are selected. When you want to select the unit “mile”, follow this procedure.
NOTE
For vehicles without MITSUBISHI genuine audio system, only the unit of average fuel consumption can be changed to km or miles as you like.
1. Press the “M” button while pressing the button (A) to activate the display unit selection function. The currently selected unit will appear.
2. Use the “H” or “M” button to select the desired speed unit, then press the “SET” button to enter the setting.
H- km
M- mile
3. If the km unit was selected in step 2, the fuel consumption unit must be selected continuously using the “H” or “M” button. The currently selected unit will appear.
Use the “H” or “M” button to select the desired fuel consumption unit, then press the “SET” button to enter the setting.
H- L/100 km
M- km/L
4. Press the “SET” button to determine the setting. The display will return to the original display item.
NOTE
(1) For vehicles without a MITSUBISHI genuine audio system, only the unit
of fuel consumption can be changed to km or miles as you like.
(2) If you select
“M” (mile) unit in step 2, fuel consumption is automatically shown in “mpg (mile
per gallon)”.
(3) To cancel the unit setting procedure before completion, press
the button (A).
(4) The outside temperature and clock are not shown during the
unit selecting procedure.
(5) If the “SET” button is not pressed for about 15
seconds or longer in the middle of the selection, the currently selected unit is
set automatically. Then, the display returns to the original display item.
READ NEXT:
Running-in recommendations
During the running-in period for the first 1,000 km, it is advisable to drive
your new vehicle using the following precautions as a guideline to aid long life
as well as future economy and perform
Fuel selection
NOTE
The petrol-powered vehicles have the octane number automatic change device
so that you can use unleaded normal petrol 91 RON as an emergency measure in case
unleaded premium petrol 95 RON
SEE MORE:
If the vehicle breaks down
If the vehicle breaks down on the road, move it to the shoulder and use the hazard
warning flashers.
Refer to “Hazard warning flasher switch”.
If the engine stops/fails
Vehicle operation and control are affected if the engine stops.
Before moving the vehicle to a safe area be aware of the
Genuine leather
1. Lightly wipe off with gauze or other soft cloth soaked with a 5 % aqueous
solution of neutral detergent for wool. 2. Dip cloth in fresh water and wring
it out well. Using this cloth, wipe off the detergent thoroughly. 3. Apply leather
protecting agent to the genuine leather surface.
NOTE
