Mitsubishi Outlander: Electronic immobilizer (Anti-theft starting system)
The electronic immobilizer has been designed to significantly reduce the possibility of vehicle theft.
The purpose of the system is to immobilize the vehicle if an invalid start is attempted. A valid start attempt can only be achieved (subject to certain conditions) using a keyless operation system “registered” to the immobilizer system.
All of the keys provided with your new vehicle have been programmed into the vehicle’s electronics.
Refer to “Engine switch”.
NOTE
• If you lose one of the keyless operation keys, contact a MITSUBISHI MOTORS Authorized Service Point as soon as possible.
To obtain a replacement or extra spare key, take your vehicle and all remaining keys to your MITSUBISHI MOTORS Authorized Service Point. All the keys have to be re-registered in the immobilizer computer unit.
The immobilizer can register up to 4 different keys.
READ NEXT:
Engine switch
In order to prevent theft, the engine will not start unless a preregistered keyless
operation key is used.
(Engine immobilizer function) If you are carrying the keyless operation key,
you can sta
Warning activation
In order to prevent vehicle theft or the accidental operation of the keyless
operation system, the buzzer and the display on the information screen in the multi-
information display are used to al
Steering wheel lock
To lock
Press the engine switch to put the operation mode in OFF.
Open one of the doors.
To unlock
The following methods can be used to unlock the steering wheel.
• Put the operation mode in AC
SEE MORE:
Inspection and maintenance followingrough road operation
After operating the vehicle in rough road conditions, be sure to perform the
following inspection and maintenance procedures:
● Check that the vehicle has not been damaged by rocks, gravel, etc.
● Carefully wash the vehicle with water.
Drive the vehicle slowly while lightly depressi
Installation of accessories
We recommend you to consult a MITSUBISHI MOTORS Authorized Service Point.
• The installation of accessories, optional parts, etc., should only be carried
out within the limits prescribed by law in your country, and in accordance with
the guidelines and warnings contained within the documents
