Mitsubishi Outlander manuals

Mitsubishi Outlander: For cold and snowy weather

Ventilation slots

The ventilation slots in front of the windscreen should be kept clear of leaves or brushed clear after heavy snowfall, so that the operation of the heating and ventilation systems will not be impaired.

Weatherstripping

To prevent freezing of the weatherstripping on the doors, bonnet, etc., they should be treated with silicone grease or spray.

Additional equipment

It is a good idea to carry a shovel or a short-handled spade in the vehicle during the winter so that you can clear away snow if you get stranded. A small hand-brush for sweeping snow off the vehicle and a plastic scraper for the windscreen and rear window are also useful.

READ NEXT:

 Fusible links

The fusible links will melt to prevent a fire if a large current attempts to flow through certain electrical systems. In case of a melted fusible link, we recommend you to have your vehicle inspect

 Fuses

 Fuse block location

To prevent damage to the electrical system due to shortcircuiting or overloading, each individual circuit is provided with a fuse. There are fuse blocks in the passenger compartment and in the engi

SEE MORE:

 Electronically controlled 4WDsystem

The electronically controlled 4WD system is a 4- wheel drive system that allows one of three drive modes to be selected with a dial, in accordance with the driving conditions. The following drive modes are available. 4-wheel drive operation requires special driving skills. Carefully read th

 To listen to tracks from a device connected via Bluetooth

1. Press the PWR button (2) to turn on the audio system. The system turns on in the last mode used. 2. Press the CD button (1) several times to switch to the B (Bluetooth®) mode. The input mode changes as follows every time the CD button is pressed. CD mode → USB (iPod) mode → Blu

© 2010-2025 Copyright www.mioutlander.com