Mitsubishi Outlander: Fuse block location
To prevent damage to the electrical system due to shortcircuiting or overloading, each individual circuit is provided with a fuse.
There are fuse blocks in the passenger compartment and in the engine compartment.
READ NEXT:
Passenger compartment (LHD vehicles)
The fuse blocks in the passenger compartment are located behind the fuse lid
in front of the driver’s seat at the position shown in the illustration.
A- Main fuse block
B- Sub fuse block
1. O
Passenger compartment (RHD vehicles)
The fuse boxes in the passenger compartment are located behind the glove box
at the position shown in the illustration.
A- Main fuse block
B- Sub fuse block
1. Open the glove box.
2. Move th
Engine compartment
In the engine compartment, the fuse block is located as shown in the illustration.
1- Push the knob.
2- Remove the cover.
SEE MORE:
Traffic information
The radio will automatically tune in to traffic information broadcasts while
receiving UKW broadcasts, playing cassettes.
To select this function, follow the instructions below.
1. Press the TP button (2). The display will show “TP” (11). If the RDS data
can be read, the display will show
Emergency starting
If the engine cannot be started because the battery is weak or dead, the battery
from another vehicle can be used with jumper cables to start the engine.
WARNING
To start the engine by use of jumper cables from another vehicle, perform
the correct procedures according to the instruction manual
© 2010-2025 Copyright www.mioutlander.com
