Mitsubishi Outlander: iPod control panel and display
Mitsubishi Lancer / Mitsubishi Lancer Owner's Manual / For pleasant driving / To play tracks from USB device / iPod control panel and display
1- AM/FM button
2- CD (Mode change) button
3- PWR (On-Off) button
4- PAGE (Title scroll) button
5- DISP (Title display) button
6- RPT (Repeat) button
7- RDM (Random) button
8- 
(Fast-reverse) button
9- 
(Fast-forward) button
10- DISC UP button
11- FOLDER switch
12- TRACK (Track up/down) button
13- i (iPod) indicator
14- TRACK indicator
15- RPT/RDM/D-RDM indicator
READ NEXT:
To play from an iPod
1. Press the PWR button (3) to turn on the audio system. The system turns on
in the last mode used.
2. Connect your iPod to the USB input terminal.
Refer to “How to connect an iPod”.
3. Press
To play iPod tracks via voice operation (vehicles with Bluetooth® 2.0 interface)
Desired tracks can be selected and played from your iPod by “Artist”, “Album”,
“Playlist” and “Genre” using voice commands.
For information concerning the voice recognition function
USB control panel and display
1- AM/FM button
2- CD (Mode change) button
3- PWR (On-Off) button
4- PAGE (Title scroll) button
5- DISP (Title display) button
6- RPT (Repeat) button
7- RDM (Random) button
8- (Fast-revers
SEE MORE:
Seat belt inspection
(1) Check the belts for cuts, worn or frayed webbing and for cracked or deformed
metallic parts. Replace the belt assembly if defective. (2) A dirty belt should
be cleaned with neutral detergent in warm water. After rinsing in water, let it
dry in the shade. Do not attempt to bleach or re-dye
Tips for starting
► Do not operate the starter motor continuously longer than 10 seconds; doing
so could run down the battery. If the engine does not start, turn the ignition switch
back to “LOCK”, wait a few seconds, and then try again.
Trying repeatedly with the starter motor still turning will damag
© 2010-2025 Copyright www.mioutlander.com
