Mitsubishi Outlander: Front passenger seat belt warning lamp
Mitsubishi Lancer / Mitsubishi Lancer Owner's Manual / Seat and seat belts / Seat belts / 3-point type seat belt (with emergency locking mechanism) / Front passenger seat belt warning lamp
The front passenger seat belt warning lamp is located on the instrument panel.
The lamp comes on when a person sits on the front passenger seat but does not fasten the seat belt. It goes off when the seat belt is subsequently fastened.
Warning
► Do not install any accessory or sticker that makes the lamp difficult to see.
READ NEXT:
Adjustable seat belt anchor (front seats)
The seat belt anchor height can be adjusted.
Move the seat belt anchor down with the lock knob (A) depressed. To move the
anchor up, slide it without depressing the lock knob (A).
Warning
`
Pregnant women restraint
Warning
► Seat belts work for everyone, including pregnant women. Pregnant women should
use the available seat belts. This will reduce the likelihood of injury to both
the woman and the un
Seat belt pretensioner system and force limiter system
The driver’s seat and front passenger’s seat each have a seat belt equipped with
a pretensioner system.
SEE MORE:
If your vehicle needs to be towed
If towing is necessary, we recommend you to have it done by your MITSUBISHI MOTORS
Authorized Service Point or a commercial tow truck service.
In the following cases, transport the vehicle using a tow truck.
► The engine runs but the vehicle does not move or abnormal noise is produced.
&#
Parking
Parking on a slope
Fully engage the parking brake, and then move the gearshift lever to 1st (on
an uphill) or reverse (on a downhill) position on manual transmission vehicle. On
automatic transmission vehicle, move the selector lever to “P” position. When parking
on a hill, apply chocks t
© 2010-2025 Copyright www.mioutlander.com
