Mitsubishi Outlander: Seat belt pretensioner system and force limiter system
Mitsubishi Lancer / Mitsubishi Lancer Owner's Manual / Seat and seat belts / Seat belt pretensioner system and force limiter system
The driver’s seat and front passenger’s seat each have a seat belt equipped with a pretensioner system.
READ NEXT:
Pretensioner system
The pretensioner system will retract their respective seat belts instantaneously,
thus maximizing the seat belt’s effectiveness, if there is a frontal impact severe
enough to injure the driver a
SRS warning
This warning lamp/display is shared by the SRS airbags and the pretensioner seat
belts.
Refer to “SRS warning lamp/display”.
Force limiter system
In the event of a collision, each force limiter system will effectively absorb
the load applied to the seat belt to minimize the impact to the passenger.
SEE MORE:
Starting the engine (diesel-powered vehicles)
[For vehicles equipped with keyless operation system]
For information on operations for vehicles equipped with the keyless operation
system, refer to “Keyless operation system: Starting” on pages 1-17, 1-20.
[Except vehicles equipped with keyless operation system]
1. Insert the ignition key
Front passenger’s airbag OFF indication lamp
The front passenger’s airbag OFF indication lamp is located in the instrument
panel.
The indication lamp normally comes on when the ignition switch is turned to the
“ON” position, and goes off a few seconds later.
When the front passenger’s airbag ON-OFF switch is turned OFF, the ind
© 2010-2026 Copyright www.mioutlander.com
