Mitsubishi Outlander: Force limiter system
Mitsubishi Lancer / Mitsubishi Lancer Owner's Manual / Seat and seat belts / Seat belt pretensioner system and force limiter system / Force limiter system
In the event of a collision, each force limiter system will effectively absorb the load applied to the seat belt to minimize the impact to the passenger.
READ NEXT:
Child restraint
When transporting children in your vehicle, some type of child restraint system
should always be used according to the size of the child. This is required by law
in most countries.
The regulation
Caution for installing the child restraint on vehicles with a front passenger
airbag
The label shown here is attached on vehicles with a front passenger airbag.
Warning
► Extreme Hazard!
Do not use a rearward facing child restraint on a seat protected by an airbag in
fro
Infants and small children
When transporting infants and small children in your vehicle, follow the instruction
given below.
Instruction:
► For small infants, an infant carrier should be used. For small children who
SEE MORE:
Position lamps (for vehicles equipped with high intensity discharge headlamps)
1. To create enough work space, turn the steering wheel all the way in the direction
opposite to the side you wish to replace.
2. Remove the clips (A) and screws (B) to turn up the cover (C).
3. Turn the socket (D) anticlockwise to remove it.
4. Pull the bulb out of the socket.
5. To i
To activate
1. Push the main switch (A) at the end of the auto–speed control lever. 2.
Pull down the lever (B) while driving at the desired speed.
When the main switch (A) is ON, the “CRUISE” indication lamp located in the instrument
panel will illuminate.
CAUTION
(1) As a safety precaution, th
© 2010-2026 Copyright www.mioutlander.com
