Mitsubishi Outlander: Fuel filter indicator display
Mitsubishi Lancer / Mitsubishi Lancer Owner's Manual / Instruments and controls / Information screen display / Fuel filter indicator display
When the ignition switch is “ON”, if more than specified limit water has accumulated in the fuel filter, a warning display is displayed on the information screen in the multi-information display.
Caution
► If this warning display is displayed we recommend you to have it checked.
Prolonged driving with the warning display on the screen may damage the engine.
Note
► If “REMOVE WATER IN SEPARATOR” does not go out or appears frequently after removing the water, we recommend you to consult a MITSUBISHI MOTORS Authorized Service Point.
READ NEXT:
Brake warning display
This warning is displayed if you drive with the parking brake still applied.
The warning lamp in the instrument cluster only illuminates when the parking brake
is applied.
Caution
► If
Charge warning display
If there is a fault with the charging system, the warning display is displayed
on the information screen in the multi-information display. The warning lamp in
the instrument cluster also illumin
Oil pressure warning display
If the engine oil pressure drops while the engine is running, the warning display
is displayed on the information screen in the multi-information display.
Caution
► If the vehicle is driv
SEE MORE:
Towing
Caution
► When towing the vehicle with only the front wheels or only the rear wheels
raised off the ground, do not place the ignition switch in the “ON” position. Placing
the ignition switch in the “ON” position could cause the ASC to operate, resulting
in an accident.
Note th
Passenger’s switches
The passenger’s switches can be used to operate the corresponding passenger’s
door windows.
Press the switch down to open the window, and pull up the switch to close it.
If the switch is fully pressed down/pulled up, the door window automatically
opens/closes completely.
If you want to
© 2010-2025 Copyright www.mioutlander.com
