Mitsubishi Outlander: Oil pressure warning display
Mitsubishi Lancer / Mitsubishi Lancer Owner's Manual / Instruments and controls / Information screen display / Oil pressure warning display
If the engine oil pressure drops while the engine is running, the warning display is displayed on the information screen in the multi-information display.
Caution
► If the vehicle is driven while the engine oil is low, or the oil level is
normal but the warning is displayed, the engine may burn out and be damaged.
► If the warning is displayed while the engine is running, immediately park your
vehicle in a safe place and check the engine oil level.
► If the warning is displayed while the engine oil level is normal, have it inspected.
READ NEXT:
Engine oil level warning display
When the ignition switch is in the “ON” position, if it is suspected that the
engine oil level has increased excessively, the warning display is displayed on
the information screen in the mu
Headlamps
Note
► Do not leave the lamps on for a long time while the engine is stationary (not
running).
A rundown battery could result.
► When it rains, or when the vehicle has been washed, t
SEE MORE:
Fuel selection
NOTE
The petrol-powered vehicles have the octane number automatic change device
so that you can use unleaded normal petrol 91 RON as an emergency measure in case
unleaded premium petrol 95 RON or higher is not available on journey, etc. In such
a case, you don’t need to adjust the engine
Procedure for replacing the remote control switch battery
1. Before replacing the battery, remove static electricity from your body by
touching a metal grounded object.
2. With the MITSUBISHI mark facing you, insert the cloth-covered tip of a straight
blade (or minus) screwdriver into the notch in the case and use it to open the case.
Note
►
© 2010-2025 Copyright www.mioutlander.com
