Mitsubishi Outlander manuals

Mitsubishi Outlander: Engine oil level warning display

Mitsubishi Lancer / Mitsubishi Lancer Owner's Manual / Instruments and controls / Information screen display / Engine oil level warning display

When the ignition switch is in the “ON” position, if it is suspected that the

When the ignition switch is in the “ON” position, if it is suspected that the engine oil level has increased excessively, the warning display is displayed on the information screen in the multi-information display.

► If this warning is displayed while driving, stop the vehicle in a safe place, Caution

► If this warning is displayed while driving, stop the vehicle in a safe place, turn off the engine, and check the engine oil level.

Refer to “Engine oil”.

► Immediately have your vehicle checked by a MITSUBISHI MOTORS Authorized Service Note

► Immediately have your vehicle checked by a MITSUBISHI MOTORS Authorized Service Point.

READ NEXT:

 Combination headlamps and dipper switch

 Headlamps

Note ► Do not leave the lamps on for a long time while the engine is stationary (not running). A rundown battery could result. ► When it rains, or when the vehicle has been washed, t

 Lamps (headlamps, fog lamp, etc.) auto- cutout function

► If, while the lamp switch is in the “ ” position, the ignition switch is turned to the “LOCK” position or “ACC” position, or the key is removed from the ignition switch, the la

SEE MORE:

 Seat

1-Front seat ● To adjust forward or backward → P. 2-6. ● To recline the seatback → P. 2-7. ● To adjust seat height (driver’s seat only) → P. 2-8. ● Armrest → P. 2-10. ● Heated seats → P. 2-10. 2- Second seat ● To adjust for

 Cruise control

Cruise control is an automatic speed control system that keeps a set speed. It can be activated at speeds from about 40 km/h (25 mph) up to about 200 km/h (124 mph). Caution ► When you do not wish to drive at a set speed, turn off the cruise control for safety. ► Do not use cru

© 2010-2025 Copyright www.mioutlander.com