Mitsubishi Outlander: Inside rear-view mirror
Mitsubishi Lancer / Mitsubishi Lancer Owner's Manual / Starting and driving / Inside rear-view mirror
Adjust the rear-view mirror only after making any seat adjustments so you have a clear view to the rear of the vehicle.
Warning
► Do not attempt to adjust the rear-view mirror while driving. This can be
dangerous.
Always adjust the mirror before driving.
Adjust the rear-view mirror to maximize the view through the rear window.
READ NEXT:
To adjust the vertical mirror position
It is possible to move the mirror up and down to adjust its position.
To adjust the mirror position
It is possible to move the mirror up/down and left/ right to adjust its position.
To reduce the glare
Type 1
The lever (A) at the bottom of the mirror can be used to adjust the mirror to
reduce the glare from the headlamps of vehicles behind you during night driving.
1- Normal
2- Anti-glare
Ty
SEE MORE:
Front fog lamps
Remove the cover mounting screw.
Remove bolts (1) and (2) with a screwdriver, and pull the lamp body towards you.
NOTE
Do not turn the aiming adjusting bolt (3).
Remove the connector secured at the bracket.
Undo the lamp cover while pressing on the lugs, then disconnect the connector.
Ignition switch
[For vehicles equipped with keyless operation system]
For information on operations for vehicles equipped with the keyless operation
system, refer to “Keyless operation system: Ignition switch” on pages 1-11 and 1-18.
[Except for vehicles equipped with keyless operation system]
LOCK
The
© 2010-2025 Copyright www.mioutlander.com
