Mitsubishi Outlander: Outside rear-view mirrors
Mitsubishi Lancer / Mitsubishi Lancer Owner's Manual / Starting and driving / Outside rear-view mirrors
READ NEXT:
To adjust the mirror position
The outside rear-view mirrors can be operated when the ignition switch is in
the “ON” or “ACC” position.
Warning
► Do not attempt to adjust the rear-view mirrors while driving. This
Retracting and extending the outside mirrors
The outside mirror can be folded in towards the side window to prevent damage
when parking in narrow areas.
Caution
► Do not drive the vehicle with the mirror folded in.
The lack of rearwa
Retracting and extending the mirrors using the mirror retractor switch
With the ignition switch in the “ON” or “ACC” position, push the mirror retractor
switch to retract the mirrors. Push it again to extend the mirrors to their original
positions.
After pla
SEE MORE:
Front fog lamps (Type 2)
1. Remove the screw (A).
2. Pull the cover out in the direction of the arrow shown in the illustration.
3. Remove the screws (B) and pull the entire lamp unit out.
Note
► When unfastening the screws, be careful not to mistakenly move the beam position
adjustment screw (C).
4. P
Headlamp levelling switch
The angle of the headlamp beam varies depending on the load carried by the vehicle.
The headlamp levelling switch can be used to adjust the headlamp illumination
distance (when the lower beam is illuminated) so that the headlamps’ glare does
not distract other drivers.
Set the switch accordi
© 2010-2026 Copyright www.mioutlander.com
