Mitsubishi Outlander: To adjust the mirror position
The outside rear-view mirrors can be operated when the ignition switch is in the “ON” or “ACC” position.
Warning
► Do not attempt to adjust the rear-view mirrors while driving. This can be
dangerous.
Always adjust the mirrors before driving.
► Your vehicle is equipped with convex type mirrors. Please take into consideration,
that objects you see in the mirror will look smaller and farther away compared to
a normal flat mirror.
Do not use this mirror to estimate distance of following vehicles when changing
lanes.
1. Place the lever (A) to the same side as the mirror whose adjustment is desired.
L- Left outside mirror adjustment
R- Right outside mirror adjustment
2. Press the switch (B) to the left, right, up or down to adjust the mirror position.
1- Up
2- Down
3- Right
4- Left
3. Return the lever (A) back to the middle position
READ NEXT:
Retracting and extending the outside mirrors
The outside mirror can be folded in towards the side window to prevent damage
when parking in narrow areas.
Caution
► Do not drive the vehicle with the mirror folded in.
The lack of rearwa
Retracting and extending the mirrors using the mirror retractor switch
With the ignition switch in the “ON” or “ACC” position, push the mirror retractor
switch to retract the mirrors. Push it again to extend the mirrors to their original
positions.
After pla
Retracting and extending the mirrors without using the mirror retractor switch
[Vehicles with keyless entry system] The mirrors automatically retract or extend
when the doors are locked or unlocked using the remote control switches of the keyless
entry system. Refer to “Ke
SEE MORE:
Changing the detection areas
The detection areas can be changed as follows:
Vehicles with a towing bar
While the operation of the system is stopped at the “SONAR” switch, push the
“SONAR” switch approximately 3 seconds or more, and release it. The buzzer sounds
twice to indicate that the detection area has been ch
Snow tyres
The use of snow tyres is recommended for driving on snow and ice. To preserve
driving stability, mount snow tyres of the same size and tread pattern on all 4
wheels.
Snow tyres worn more than 50% are no longer suitable for use as snow tyres.
Snow tyres which do not meet specifications must not
