Mitsubishi Outlander manuals

Mitsubishi Outlander: Snow tyres

The use of snow tyres is recommended for driving on snow and ice. To preserve driving stability, mount snow tyres of the same size and tread pattern on all 4 wheels.

Snow tyres worn more than 50% are no longer suitable for use as snow tyres.

Snow tyres which do not meet specifications must not be used.

► Observe permissible maximum speed for your snow tyres and the legal speed Caution

► Observe permissible maximum speed for your snow tyres and the legal speed limit.

► The laws and regulations concerning snow tyres (driving speed, required Note

► The laws and regulations concerning snow tyres (driving speed, required use, type, etc.) vary. Find out and follow the laws and regulations in the area you intend to drive.
► If flange nuts are used on your vehicle, change to tapered nuts when steel wheels are used.

READ NEXT:

 Tyre chains

If tyre chains have to be used, ensure that they are fitted only on the drive wheels (front) in accordance with the manufacturer’s instructions. It is recommended that snow chains are carried in

 Parking brake break-in

Break-in the parking brake linings whenever the brake performance of the parking brake is insufficient or whenever the parking brake linings and/or discs are replaced, in order to assure the best

 Wiper blade rubber replacement

If the blades are frozen to the windscreen or rear window, do not operate the wipers until the ice has melted and the blades are freed, otherwise the wiper motor may be damaged. Windscreen wiper

SEE MORE:

 Average fuel consumption

This value shows the average fuel consumption (in L/100 km or mpg) since the display was reset. If you reset the display at the time when you want to start the measurements, average fuel consumption from that point of time can be displayed. To reset the display [Vehicles without MITSUBISHI g

 Passenger compartment (RHD vehicles)

The fuse boxes in the passenger compartment are located behind the glove box at the position shown in the illustration. A- Main fuse block B- Sub fuse block 1. Open the glove box. 2. Move the rod (A) on the left side of the glove box to the left side of the box. 3. While pressing the

© 2010-2025 Copyright www.mioutlander.com