Mitsubishi Outlander: Tyres
Warning
► Driving with tyres that are worn, damaged or improperly inflated can lead to a loss of control or blow out of the tyres which can result in a collision with serious or fatal injury.
READ NEXT:
Tyre inflation pressures
1600 models
Check the tyre inflation pressure of all the tyres while they are cold; if insufficient
or excessive, adjust to the specified value.
After the tyre inflation pressure has been adjust
Wheel condition
1- Location of the tread wear indicator
2- Tread wear indicator
Check the tyres for cuts, cracks and other damage.
Replace the tyres if there are deep cuts or cracks.
Also check each tyre for pi
Replacing tyres and wheels
Caution
► Avoid using different size tyres from the one listed and the combined use
of different types of tyres, as this can affect driving safety.
Refer to “Tyres and wheels”.
►
SEE MORE:
Multi centre display
When the ignition switch is in the ”ACC” position, the outside temperature and
clock are displayed in the multi centre display. When the ignition switch is in
the ”ON” position, the average fuel consumption is displayed besides outside temperature
and digital clock.
If your vehicle
To change a tyre
1. If a wheel cover is installed, first remove the cover. (Refer to “Wheel covers”.)
Then loosen the wheel nuts a quarter turn with the wheel nut wrench. Do not remove
the wheel nuts yet.
2. Place the jack under one of the jacking points (A) shown in the illustration.
Use the jacking po
© 2010-2026 Copyright www.mioutlander.com
