Mitsubishi Outlander: Wheel condition
1- Location of the tread wear indicator
2- Tread wear indicator
Check the tyres for cuts, cracks and other damage.
Replace the tyres if there are deep cuts or cracks.
Also check each tyre for pieces of metal or pebbles.
The use of worn tyres can be very dangerous because of the greater chance of skidding or hydroplaning.
The tread depth of the tyres must exceed 1.6 mm in order for the tyres to meet the minimum requirement for use.
Tread wear indicators will appear on the surface of the tyre as the tyre wears, thereby indicating that the tyre no longer meets the minimum requirement for use. When these wear indicators appear, the tyres must be replaced with new ones.
On 4-wheel drive vehicles, when replacement of any of the tyres is necessary, replace all of them.
Caution
► Always use tyres of the same size, same type, and same brand, and which
have no wear differences.
Using tyres of different size, type, brands or degree of wear, will increase the
differential oil temperature, resulting in possible damage to the driving system.
Further, the drive train will be subjected to excessive loading, possibly leading
to oil leakage, component seizure, or other serious faults.
READ NEXT:
Replacing tyres and wheels
Caution
► Avoid using different size tyres from the one listed and the combined use
of different types of tyres, as this can affect driving safety.
Refer to “Tyres and wheels”.
►
Tyre rotation
Tyre wear varies with vehicle conditions, road surface conditions and individual
driver’s driving habits.
To equalize the wear and help extend tyre life, it is recommended to rotate the
tyres i
Snow tyres
The use of snow tyres is recommended for driving on snow and ice. To preserve
driving stability, mount snow tyres of the same size and tread pattern on all 4
wheels.
Snow tyres worn more than 50%
SEE MORE:
To play from a USB memory device
1. Press the PWR button (3) to turn on the audio system. The system turns on
in the last mode used.
2. Connect your USB memory device to the USB input terminal. Refer to “How to
connect a USB memory device”.
3. Press the CD button (2) several times to switch to the USB mode. The input
mo
Auto reset mode
► When the average fuel consumption is being displayed, if you hold down the
multi-information meter switch, the average fuel consumption displayed at that time
is reset.
► If the ignition switch is at “ACC” or “LOCK” for about 4 hours or longer, the
average fuel consumpti
