Mitsubishi Outlander: To adjust the vertical mirror position
It is possible to move the mirror up and down to adjust its position.

To adjust the mirror position
It is possible to move the mirror up/down and left/ right to adjust its position.

READ NEXT:
Type 1
The lever (A) at the bottom of the mirror can be used to adjust the mirror to
reduce the glare from the headlamps of vehicles behind you during night driving.
1- Normal
2- Anti-glare
Ty
The outside rear-view mirrors can be operated when the ignition switch is in
the “ON” or “ACC” position.
Warning
► Do not attempt to adjust the rear-view mirrors while driving. This
SEE MORE:
Parking on a slope
Fully engage the parking brake, and then move the gearshift lever to 1st (on
an uphill) or reverse (on a downhill) position on manual transmission vehicle. On
automatic transmission vehicle, move the selector lever to “P” position. When parking
on a hill, apply chocks t
(The buzzer stops and the security indicator continues to blink with indicator’s
reduced lit-up duration time.) Once the system preparation mode has ended, the system
armed mode starts.
If an unlawful opening of any of the doors, rear hatch or bonnet is detected
during the system armed mode
© 2010-2025 Copyright www.mioutlander.com
