Mitsubishi Outlander: Combination headlamps and dipper switch
Mitsubishi Lancer / Mitsubishi Lancer Owner's Manual / Instruments and controls / Combination headlamps and dipper switch
- Headlamps
- Lamps (headlamps, fog lamp, etc.) auto- cutout function
- Lamp monitor buzzer
- Dipper (High/Low beam change)
- Headlamp flasher
- Welcome light (for vehicles equipped with the keyless entry system or the keyless operation system)
- Coming home light
READ NEXT:
Headlamps
Note
► Do not leave the lamps on for a long time while the engine is stationary (not
running).
A rundown battery could result.
► When it rains, or when the vehicle has been washed, t
Lamps (headlamps, fog lamp, etc.) auto- cutout function
► If, while the lamp switch is in the “ ” position, the ignition switch is turned
to the “LOCK” position or “ACC” position, or the key is removed from the ignition
switch, the la
Lamp monitor buzzer
[When the engine was started using the key] If the driver’s door is opened when
the key is in the “LOCK” or “ACC” position or removed from the ignition switch while
the lamps are on, a b
SEE MORE:
History of the Carisma
The first Carismas arrived in the UK, in five-door hatch form only, at the
end of 1995. These two initial models consisted of an 89bhp 1.6, offered in GL
and GLX trim, and a 114bhp 1.8 in GLX and GLS guise. Within a year this line-up
was replicated in saloon form. Then, in May 1997, they were
Full-time 4WD
Full-time 4WD vehicles are propelled by engine power distributed constantly and
appropriately to all 4 wheels.
Not only does this ensure better handling on dry, paved roads but also permits
better traction when driving on slippery, wet or snow-covered roads and when moving
out of mud.
These
© 2010-2025 Copyright www.mioutlander.com
