Mitsubishi Outlander: Fuses
READ NEXT:
Fuse block
To prevent damage to the electric system due to short-circuiting or overloading,
each individual circuit is provided with a fuse. There are fuse boxes in the passenger
compartment and in the eng
Fuse load capacity
The fuse capacity and the name of the electrical systems protected by the fuses
are indicated on the inside of the coin box located at the driver’s leg area and
on the fuse box lid for fuses l
Changing a fuse
1. Before replacing a fuse, always turn off the electrical circuit concerned
and turn the ignition key to the “LOCK” position. 2. Remove the fuse box cover.
3. Referring to the fuse load cap
SEE MORE:
Radio data system (RDS)
1- PWR (On-off) switch 2- TP (Traffic program) button 3- PTY (Program type)
button 4- U/M/L (UKW/MW/LW selection) button 5- TUNE/SEEK (Down-step/Downseek)
button 6- TUNE/SEEK (Up-step/Up-seek) button 7- Memory select buttons 8- Frequency
display window 9- RDS (Radio data system) indicator 10
System cancellation
It is possible to cancel the system activation during the system preparation
mode or the system armed mode.
In addition, it is possible to cancel the alarm once it has been activated.
Refer to “Cancelling the system”, “Cancelling the alarm”.
Note
► When lending the vehicle to an
© 2010-2026 Copyright www.mioutlander.com
