Mitsubishi Outlander manuals

Mitsubishi Outlander: Headlamps and position lamps

Remove the sealing cover by turning it anticlockwise and disconnect the connector.

Remove the sealing cover by turning it anticlockwise and disconnect the connector.

READ NEXT:

 Headlamps

Unhook the spring which secures the bulb, and then remove the bulb. CAUTION Never hold the halogen lamp bulb with a bare hand, dirty glove, etc. The oil from your hand could cause the bulb to

 Position lamps

Remove the lamp socket by turning it anticlockwise, then pull out the bulb from the socket.

 Front turn–signal lamps

Petrol–powered vehicles, Diesel–powered vehicles (right side) Turn the bulb socket anticlockwise to remove. And remove the bulb from the socket by turning anticlockwise while pressing it inwa

SEE MORE:

 When turning from “LOCK” (PUSH OFF) to “ACC”

Push the ignition switch and turn it slowly. A- Steering wheel locked B- Steering wheel released Note ► If the ignition switch does not turn from “LOCK” (PUSH OFF) to “ACC”, press the ignition switch again, slightly move the steering wheel left and right, and then turn the i

 Petrol-powered vehicles with turbocharge

► Select engine oil of the proper SAE viscosity number according to the atmospheric temperature. SAE 5W-30, 0W-30 and 0W-40 engine oil can only be used if it meets ACEA A3/B3, A3/B4 or A5/B5 and API SM or higher specifications. ► SAE 0W-30 and 0W-40 engine oil are recommended to

© 2010-2025 Copyright www.mioutlander.com