Mitsubishi Outlander: How to adjust the tune
Mitsubishi Carisma / Mitsubishi Carisma Owner's Manual / For pleasant driving / UKW/MW/LW electronic tuning radio with CD player* / How to adjust the tune
Manual tuning
The frequency changes every time the TUNE/SEEK button (6 or 7) is pressed. Press the button to select the desired station.
Automatic tuning
After keeping the TUNE/SEEK button (6 or 7) depressed for more than 1 second, release the button, and selected station reception will start.
READ NEXT:
How to enter frequencies in the memory
Manual setting
You can assign to the memory select buttons (8) a maximum of 12 stations in the
UKW band (6 U1 stations and 6 U2 stations), 6 stations in the MW band and 6 stations
in the LW ban
Radio data system (RDS)
1- PWR (On-off) switch 2- TP (Traffic program) button 3- PTY (Program type)
button 4- U/M/L (UKW/MW/LW selection) button 5- TUNE/SEEK (Down-step/Downseek)
button 6- TUNE/SEEK (Up-step/Up-seek) b
How to enter PTYs in the memory
As many as 6 PTYs can be entered in the memory.
Follow the steps described below.
1. Press either the TUNE/SEEK button (5 or 6) to tune the PTY to be entered in
the memory. 2. Press one of the mem
SEE MORE:
Obstacle detection areas
The detection areas of the corner and back sensors are limited to those shown
in the illustration. Moreover, the sensors are unable to detect low or thin objects
or objects near the rear bumper. Thus, make sure to check the surroundings as you
operate the vehicle in a safe manner.
Corner and
Starting the engine (petrol-powered vehicles)
The starting procedure is as follows: 1. Fasten the seat belt.
2. Make sure the parking brake is applied.
3. Depress and hold the brake pedal.
4. Fully depress the clutch pedal. (M/T)
Note
► On vehicles with the Auto Stop & Go (AS&G) system, the starter will not operate
unless
© 2010-2025 Copyright www.mioutlander.com
