Mitsubishi Outlander: UKW/MW/LW electronic tuning radio with CD player*
The audio system can be used when the ignition switch is in the “ON” or “ACC” position.
A– Display window
B– Audio system
NOTE
(1) The MITSUBISHI Genuine CD autochanger can be connected to this audio system.
The CD autochanger can be operated by the switch on the audio body. Refer to “To
listen to a CD autochanger” on page 6–24.
(2) To listen to the audio system while
the engine is stopped, turn the ignition switch to the “ACC” postion.
(3) When
a cellular phone is used inside the vehicle, noise may be produced from the audio
equipment. This does not mean that something is wrong with the audio equipment.
In such a case, use the cellular phone at a place as far as possible from the audio
equipment.
(4) In case of misuse (entry of a foreign object or water, smoke or
odour, etc.), immediately stop the operation and have the audio system checked at
an authorized MITSUBISHI dealer. Never try to repair it by yourself. Avoid continuous
usage without inspection by a qualified person.
(5) The audio system’s control
panel can be removed to deter thieves. For details, refer to section entitled “Audio
system anti-theft feature” on page 6–26.
- To listen to the radio
- How to adjust the volume
- How to adjust the tune
- How to enter frequencies in the memory
- Radio data system (RDS)
- How to enter PTYs in the memory
- To change the language of PTY display
- Traffic information
- TP (Traffic information Program) search function
- Emergency broadcasts
- To listen to a CD
- To listen to a CD [With a CD player]
- [With a CD autochanger]
- To find the start of a desired track
- How to repeat the same track
READ NEXT:
To listen to the radio
1- PWR (On-off) switch 2- VOL (Volume control) knob 3- U/M/L (UKW/MW/LW selection)
button 4- Audio adjust button 5- AUDIO button 6- TUNE/SEEK (Down-step/Down-seek)
button 7- TUNE/SEEK (Up-step/U
How to adjust the volume
VOL (Volume control)-2
Turn the knob clockwise to increase the volume.
How to adjust the tone
Press the AUDIO button (5) to select BASS TREBLE FADER BALANCE Audio adjust mode
off.
BASS (Bass t
How to adjust the tune
Manual tuning
The frequency changes every time the TUNE/SEEK button (6 or 7) is pressed. Press
the button to select the desired station.
Automatic tuning
After keeping the TUNE/SEEK button (6 or
SEE MORE:
Type 2 (Except for vehicles equipped with the central door lock switch)
Note
► Each of the doors can be locked or unlocked independently by using the inside
lock knob (except for the driver’s door).
► Repeated continuous operation between lock and unlock could activate the central
door locking systems built-in protection circuit and prevent the syst
Manual type
Pull the seat adjusting lever and adjust the seat forward or backward to the
desired position, and release the adjusting lever.
Warning
► To ensure the seat is locked securely, try to move the seat forward or backward
without using the adjusting lever.
