Mitsubishi Outlander: To find the start of a desired track
The start of each track on a disc can be found by using the
or
button (7 or 8).
Track up:
Press the
button (8) the number
of tracks to skip over.
The frequency-display window will display the number of tracks thus selected.
Track down:
Press the
button (7) the number
of tracks to skip over.
The frequency-display window will display the number of tracks thus selected.
READ NEXT:
You can repeatedly listen to the same track by pressing the RPT button (10).
Press the RPT button, and the RPT indicator (15) will come on.
To release, press the button again.
How to use the SCAN b
To prevent theft of the audio system, the control panel can be removed. Always
remove the control panel when you leave the vehicle.
Removing the control panel
Turn the ignition switch to the OFF
CAUTION
To maintain the cassette tape player in good condition, observe the following
precautions.
(1) Do not use cassette tapes longer than C-90, otherwise sound quality and
tape durability wil
SEE MORE:
Originally, km/h and L/100 km are selected. When you want to select the unit
“mile”, follow this procedure.
NOTE
For vehicles without MITSUBISHI genuine audio system, only the unit of average
fuel consumption can be changed to km or miles as you like.
1. Press the “M” button while p
To remove the roof antenna, turn it counterclockwise.
CAUTION
Be sure to remove the roof antenna before entering an automatic car wash or
other low-roofed area.
NOTE
Be sure to remove the antenna in the following cases:
When entering a place with low clearance. When going into an automatic
© 2010-2026 Copyright www.mioutlander.com
