Mitsubishi Outlander: How to repeat the same track
You can repeatedly listen to the same track by pressing the RPT button (10).
Press the RPT button, and the RPT indicator (15) will come on.
To release, press the button again.
How to use the SCAN button
Use the SCAN button (9) to search for a particular track, etc. When this button is pressed, the first 10 seconds of each track on the disc will be played.
The disc will advance at fast-forward speed between each 10-second played in this way. Press the SCAN button again, to play the track ordinary. After completion of this scanning of tracks, the disc will begin ordinary play.
To change the order of tracks played back (For CD player)
Press the RDM button (11), and the RDM indicator (16) will illuminate and will be randomly selected, tracks for playback. To release, press the button again.
To change the order of discs played back (For CD autochanger)
Press the RDM button (11), and the RDM indicator (16) will illuminate and tracks for playback will be selected randomly from all discs loaded into the changer.
To release, press the button again.
READ NEXT:
Audio system anti-theft feature
To prevent theft of the audio system, the control panel can be removed. Always
remove the control panel when you leave the vehicle.
Removing the control panel
Turn the ignition switch to the OFF
Handling of cassette tapes
CAUTION
To maintain the cassette tape player in good condition, observe the following
precautions.
(1) Do not use cassette tapes longer than C-90, otherwise sound quality and
tape durability wil
Handling of compact discs
(1) This CD player allows use of only the compact discs with the mark shown in
the illustration above. (Playback of CD–R discs may cause problems. CD–RW discs
cannot be played.) The use of h
SEE MORE:
Lamps (room lamps, etc.) auto-cutout function (Vehicles with keyless entry system
or keyless operation system)
If any of the interior lamps are left switched on with the ignition switch in
any position other than “ON” or “ACC”, it goes off automatically after approximately
30 minutes.
The lamp goes on again if the ignition switch is turned to the “ON” or “ACC”
position, any door or the
Keyless entry system
Press the remote control switch, and all doors and the rear hatch will be locked
or unlocked as desired.
It is also possible to operate the door outside rear-view mirrors.
1- LOCK switch
2- UNLOCK switch
3- Indication lamp
