Mitsubishi Outlander: How to connect an iPod
Mitsubishi Lancer / Mitsubishi Lancer Owner's Manual / For pleasant driving / USB input terminal / How to connect an iPod
1. Park your vehicle in a safe place and turn the ignition switch to the “LOCK”
position.
2. Open the USB input terminal cover (A) in the glove box.
3. Connect the Dock connector (C) to the iPod (B).
Note
► Use a genuine Dock connector from Apple Inc.
4. Connect the Dock connector (C) to the USB input terminal (D).
Caution
► Keep the lid of the glove box closed while driving the vehicle. A lid or the contents of the glove box could otherwise cause injuries.
Note
► When closing the glove box, be careful not to trap the connector cable.
5. To remove the Dock connector, turn the ignition switch to the “LOCK” position first and perform the installation steps in reverse.
READ NEXT:
Types of connectable devices and supported file specifications
Device types
Devices of the following types can be connected.
: “iPod touch,” “iPod classic,” “iPod” and “iPod nano” are registered trademarks
of Apple Inc. in the United States
Sun visors
1- To eliminate front glare
2- To eliminate side glare
Vanity mirror
A vanity mirror is fitted to the back of the sun visor.
SEE MORE:
To store the flat tyre or spare wheel
1. Lift up the luggage floor board.
2. To store the flat tyre or spare wheel, fit the installation clamp (A) by turning
it clockwise.
NOTE
• On vehicles with a T155/90D16 or T125/90D16 size spare wheel, the clamp cannot
be used for a normal size tyre.
3. Have your damaged tyre repaired
SRS servicing
Warning
► We recommend any maintenance performed on or near the components of the
SRS to be performed by a MITSUBISHI MOTORS Authorized Service Point.
Improper work on the SRS components or wiring could result in inadvertent deployment
of the airbags, or could render the SRS inoperative
© 2010-2025 Copyright www.mioutlander.com
