Mitsubishi Outlander: Hydraulic power steering system (HPS)
Mitsubishi Lancer / Mitsubishi Lancer Owner's Manual / Starting and driving / Power steering system / Hydraulic power steering system (HPS)
The hydraulic power steering system (HPS) uses a hydraulic pressure pump to assist the turning of the steering wheel.
Caution
► Do not leave the steering wheel turned all the way in one direction. This can cause damage to the power steering system.
READ NEXT:
Electric power steering system (EPS)
The electric power steering system (EPS) uses an electric motor to assist the
turning of the steering wheel.
Note
► During repeated full-lock turning of the steering wheel (for example, whi
Electric power steering system warning display
When there is a malfunction in the system, the warning display will appear on
the information screen in the multi-information display.
Caution
► If the warning display appears during driv
If the warning display appears while driving
1. Stop the vehicle in a safe place and turn off the engine.
2. Wait approximately 30 seconds and then restart the engine to check whether the
warning display goes out; if it then remains off, ther
SEE MORE:
Steering wheel audio remote control switches
The remote control switch is located on the left side of the steering wheel.
It can be used when the ignition switch or the operation mode is in ON or ACC.
1- Volume up button
2- Volume down button
3- Power switch/Mode selector button
4- Seek up/Track up/Fast-forward button
5- Seek down/Trac
Information screen (when the ignition switch or the operation mode is OFF)
Each time you lightly press the multi-information meter switch, the display screen
switches in the following order.
1- Odometer (Type 1)/Tripmeter
2- Odometer (Type 1)/Tripmeter
3- Service reminder
4- Redisplay of a warning display screen
© 2010-2026 Copyright www.mioutlander.com
